Angle Valve for Toilet

Angle valve for toilet N10121004 is a series of brass angle valves that suitable for toilet uses.

The angle valve is similar to brass ball valve, and its structure and characteristics are modified from the ball valve. The difference with the ball valve is that the outlet of the angle valve is at a right angle of 90 degrees to the inlet. Angle valves are also called triangle valves, angle valves, and angled water valves. This is because the pipe has a 90-degree corner shape at the angle valve, so it is called an angle valve, angle valve, or angled water valve.

Angle valve for toilet composes of three parts: valve body, valve stem and handle. There are two ends: one for water inlet and the other for water outlet. The universal interface is 1/2", suitable for all toilet and faucet hoses.

The angle valve for toilet is installed at the water inlet of the sanitary ware and used to connect the hot water pipes such as faucets, toilets and water heaters, to adjust the water pressure, control the flow of water, and save water. Similar to a small switch, it is convenient to control the waterway when the water pipe is repaired. For example, if the faucet leaks in the house, the waterway can be closed through the angle valve for toilet, and there is no need to turn off the main valve at home.

The main body of the angle valve on the market is mainly made of brass, stainless steel, zinc alloy and iron.

The red-forged brass angle valve is thick and textured. It is heavy in the hand and has a service life of more than 10 years. Looking from the water inlet to the inside, the corner cut surface is smooth, and there are no defects such as pores and sand holes. Generally, it is red-punched and forged. The quality of the angle valve made by this process is very good.

It is not recommended to buy zinc alloy and iron angle valves, because the two materials are easy to rust and become brittle after a long time. They may break in the pipeline when replaced, forcibly disassembled, and may damage the threads of the water outlet.

The spool of the angle valve includes ceramic spool, spherical spool, ABS spool and so on. Ceramic valve core is the first choice for household use, and most other valve cores are used in engineering. The ceramic valve core switch feels smooth, has a long service life, and has a relatively high cost, which is suitable for family use. The rubber rotary valve core is quite laborious to open and close, and it has been mostly eliminated at present.

Handle materials are mainly zinc alloy, stainless steel, brass and ABS plastic, etc. ABS is anti-scald, zinc alloy is more common, stainless steel and brass are relatively more durable and the price is higher.

When choosing an angle valve, focus on the material and spool, which is also the main reason for the price difference.

Usually the water inlet valve is installed on the wall 200 mm above the ground on the side of the toilet. For this type of high-back toilet, the angle valve is installed at the back of the toilet and is blocked by the toilet after installation. In order to facilitate maintenance, manufacturers generally have maintenance holes in the lower part of the toilet considering these reasons during production. During maintenance, you can enter the internal switch inlet valve from the maintenance hole, or open the water tank cover from the upper part of the water tank for maintenance, or remove the entire product for maintenance.

The specific steps of installing the angle valve 1. Before installation, it should be confirmed that there is no blisters on the surface of the product, the thickness of the threaded pipe is uniform, and the switch is flexible. Before installation, the water pipe should be dredged with water once to confirm that there is no residue in the water pipe, so as not to affect the water flow. 2. Pay attention to the winding direction, take the angle valve as an example, the angle valve is screwed into the wall。